DECHEMA e.V.

Your personal planner

Day, time,
Room
Session (Chairman) Lecture
17.06.2015
10:30,
Granat
Hall 11.0 ACHEMA Praxis Forum
Innovative process analytical technology (M. Maiwald, Federal Institute for Materials Research and Testing - BAM, Berlin/D; M. Hajduk, Evonik Industries AG, Hanau/D)
Analyser device integration - the power of analytical data
C. Hobbs, ABB Ltd., Cambridgeshire/UK
17.06.2015
10:30,
Analog
Forum, Level 0 Industrial water management
Treatment of complex wastewaters (C. Weidlich, DECHEMA-Forschungsinstitut (DFI), Frankfurt/D)
Evaluation of the removal of carbamazepine, diclofenac, ibuprofen, sulfamethoxazole, iopromide, sotalol and primidone from wastewater by ozone/UV
T. Scheers, L. Jacoby, Leuven University College/B; K. Van Eyck, J. Degrève, R. Dewil, KU Leuven/B
17.06.2015
10:30,
Panorama 2
Forum, Level 1 BiobasedWorld - Microalgae biorefinery
(P. Lopez, University Complutense of Madrid/E)
Wastewater bioremediation using microalgae biomass for the production of biofuels and biochemical
C. González-Fernández, IMDEA ENERGY, Madrid/E; M. Ballesteros, CIEMAT, Madrid/E
17.06.2015
10:30,
Fantasie 1
CMF Risk Assessment and Sustainability in the Focus of Lab Planning
(B. Winter, Merzig/D; E. Dittrich, EGNATON e.V., Bensheim/D)
Minimum requirements of risk and operational concepts in the certification of DGNB and BNB
C. Heinekamp, dr. heinekamp Labor- und Institutsplanung GmbH, Karlsfeld/D
17.06.2015
10:30,
Dimension
Hall 4.2 Integrierte Roadmap "Industrielle Biotechnologie"
()
Integrierte Roadmap "Industrielle Biotechnologie"
M. Winzenick, Zentralverband Elektrotechnik- und Elektronikindustrie (ZVEI) e.V., Frankfurt/D; S. Behrendt, Institut für Zukunftsstudien und Technologiebewertung gGmbH (IZT), Berlin/D; T. Böhland, Evonik Industries AG, Hanau/D; K. Köhler, Endress + Hauser Messtechnik GmbH & Co.KG, Weil am Rhein/D; U. Vogel, Samson AG, Frankfurt/D; M. Fernandez, Siemens AG, Nürnberg/D
17.06.2015
10:30,
Agenda
Forum, Level 0 Mixing and separation technology
Fluid-solid (U. Esser, Bayer Technology Services GmbH, Leverkusen/D)
High-frequency flow reversal (HFFR) enables stable cross-flow microfiltration with micro sieves
F. Liebermann, MicroSieve Technologies GmbH, Feldmeilen/CH
17.06.2015
10:30,
Brillanz
Hall 4.2 ACHEMA Praxis Forum
Laboratory techniques (H. Philipp, BASF SE, Ludwigshafen/D; T. Gasdorf, BROEN A/S, Bedburg/D)
Photodynamic Disinfection for Cleanroom (PDC) - new technologies for gentle disinfection of surfaces
R. Gfrerer, Ortner Reinraumtechnik GmbH, Villach/A
17.06.2015
10:30,
Spektrum
CMF International powder and nanotechnology forum
Nano-bio technology and microreactor (S. Mathur, University of Cologne/D; M. Miyahara, Kyoto University/J)
Synthesis and characterization of monodisperse nickel nanoparticles using a microreactor
M. Miyahara, S. Watanabe, Kyoto University/J; M. Ito, S. Sago, Noritake Co. Ltd., Aichi/J
17.06.2015
10:30,
Illusion 2
CMF BiobasedWorld - Bioprocesses
Monitoring and modelling (K. Preuß, TH Mittelhessen, Gießen/D)
Possibilities and limits of PAT compliant measuring systems for online determination of the biomass concentration
I. Stempin, University of Applied Sciences Mittelhessen, Gießen/D; Z. Kovács, Corvinus University of Budapest/H; D. Salzig, P. Czermak, University of Applied Sciences Mittelhessen, Gießen/D
17.06.2015
10:30,
Illusion 3
CMF Safety
Human and organizational factors (J. Kuboth, Landesamt für Natur, Umwelt und Verbraucherschutz Nordrhein-Westfalen (LANUV), Essen/D)
Raising the bar on process safety
A. Zwaan, Fluor, Haarlem/NL
17.06.2015
10:30,
Conclusio 1
CMF Catalysis
(N. Bogolowski, DECHEMA-Forschungsinstitut (DFI), Frankfurt/D)
Applications of a novel perfluorosulfonic acid (PFSA) in
heterogeneous catalysis

C. Oldani, L. Merlo, Solvay Specialty Polymers Italy SpA, Bollate (MI)/I; M. Gebert, Solvay Specialty Polymers, Dusseldorf/D
17.06.2015
10:30,
Logos/Genius
Hall 9.1 ACHEMA Praxis Forum
Industrial and labour safety (L. Allford, European Process Safety Centre (EPSC), Rugby/UK)
Inherently safer design of stirred reactors. VisiMix® approach
Y. Nekhamkim, VisiMix Ltd., Jerusalem/IL
17.06.2015
10:30,
Panorama 3
Forum, Level 1 Materials
Materials (J. Heinemann, TU Darmstadt/D)
Use of improved dual-laminate piping for caustic soda in the chemical industry
E. Burggraf, R. Troschitz, STEULER-KCH GmbH, Siershahn/D
17.06.2015
10:30,
Panorama 1
Forum, Level 1 Developments in desalination
(H. Glade, University of Bremen/D)
Integration of innovative technologies in process water plants
J. Henkel, Dow Water & Process Solutions, Rheinmuenster/D; M. Slagt, Dow Water & Process Solutions, Terneuzen/NL
17.06.2015
10:30,
Illusion 1
CMF Reaction engineering
Reactor design (R.W. Fischer, Clariant Produkte (Deutschland) GmbH, Bruckmühl/D and TU München/D)
Misconceptions in design of three-phase fixed-bed reactors. novel approaches to construction of new plants and upgrading existing facilities
L.B. Datsevich, University of Bayreuth and MPCP GmbH, Mistelgau/D; F. Grosch, R. Wolfrum, MPCP GmbH, Mistelgau/D
17.06.2015
10:30,
Facette
Hall 3 VIA West ACHEMA Praxis Forum
Pharmaceutical production (J. Groll, University of Würzburg/D)
Advanced microwave freeze drying - latest development & examples
P. Püschner, Püschner GmbH & Co. KG, Schwanewede/D
17.06.2015
10:30,
Conclusio 2
CMF Falsified Medicines Directive
Aktuelles zur EU-Richtlinie zum Schutz vor Arzneimittelfälschung (M. Bergen, securPharm e.V., Frankfurt/D)
Aktueller Stand der Gesetzgebung und Überblick über die Projekte
M. Bergen, securPharm e.V., Frankfurt/D
17.06.2015
10:30,
Fantasie 2
CMF Energy efficient processes
Thermal energy storage and recovery (M. Molenda, Deutsches Zentrum für Luft- und Raumfahrt (DLR), Stuttgart/D)
Experimental investigation of process concepts for PCM thermal energy storage
P. Wiesauer, W. M. Samhaber, Universität Linz, Leonding/A
17.06.2015
10:50,
Brillanz
Hall 4.2 ACHEMA Praxis Forum
Laboratory techniques (H. Philipp, BASF SE, Ludwigshafen/D; T. Gasdorf, BROEN A/S, Bedburg/D)
Single overhead emergency safety showers: operation with favorable decontamination effect
V. Heil, U. Seifert, L. Swiatek, Fraunhofer UMSICHT, Oberhausen/D; T.H. Brock, BG RCI, Heidelberg/D
17.06.2015
10:50,
Granat
Hall 11.0 ACHEMA Praxis Forum
Innovative process analytical technology (M. Maiwald, Federal Institute for Materials Research and Testing - BAM, Berlin/D; M. Hajduk, Evonik Industries AG, Hanau/D)
A new and very simple viscosity measurement at reference temperature dedicated to chemical and petrochemical process
L. Belliere, P. Burg, C. Thierry, Sofraser SAS, Villemandeur/F
17.06.2015
10:50,
Facette
Hall 3 VIA West ACHEMA Praxis Forum
Pharmaceutical production (J. Groll, University of Würzburg/D)
Efficient, high-titer monoclonal antibody production in a fed-batch process using single-use stirred tank and rocking bioreactor systems
T. Falkman, O. Larsson, E. Fäldt, GE Healthcare Life Sciences, Uppsala/S
17.06.2015
10:50,
Logos/Genius
Hall 9.1 ACHEMA Praxis Forum
Industrial and labour safety (L. Allford, European Process Safety Centre (EPSC), Rugby/UK)
Innovative proof testing safety instrumented systems
G. Klotz-Engmann, Endress+Hauser Messtechnik GmbH+Co. KG, Weil am Rhein/D
17.06.2015
11:00,
Illusion 3
CMF Safety
Human and organizational factors (J. Kuboth, Landesamt für Natur, Umwelt und Verbraucherschutz Nordrhein-Westfalen (LANUV), Essen/D)
Implementation of a Process Safety Excellence (PSE) program at various sites of an international chemical company
R. Kauer, TÜV SÜD Industrie Service GmbH, München/D; M. Brey, Kienbaum Management Consultants, Düsseldorf/D
17.06.2015
11:00,
Analog
Forum, Level 0 Industrial water management
Treatment of complex wastewaters (C. Weidlich, DECHEMA-Forschungsinstitut (DFI), Frankfurt/D)
A kinetic study on the UV/H2O2 advanced oxidation process: influence of process parameters on the reaction rate
K. Van Eyck, S. Verschoren, R. Dewil, K.U. Leuven, Sint-Katelijne-Waver/B
17.06.2015
11:00,
Fantasie 2
CMF Energy efficient processes
Thermal energy storage and recovery (M. Molenda, Deutsches Zentrum für Luft- und Raumfahrt (DLR), Stuttgart/D)
Thermal energy storage for energy efficient processes
A. Wörner, M. Linder, S. Zunft, German Aerospace Center - DLR e.V., Stuttgart/D
17.06.2015
11:00,
Agenda
Forum, Level 0 Mixing and separation technology
Fluid-solid (U. Esser, Bayer Technology Services GmbH, Leverkusen/D)
Protein purification by Solvent Freeze Out (SFO) technology
X. Yu, Universität Halle-Wittenberg/D; J. Wang, Tianjin University/CHN; J. Ulrich, Universität Halle-Wittenberg/D
17.06.2015
11:00,
Conclusio 1
CMF Catalysis
(N. Bogolowski, DECHEMA-Forschungsinstitut (DFI), Frankfurt/D)
The alternative production process of basic organic raw material from syngas
W.S. Yang, J.W. Teng, H.X. Liu, J.T. Liu, J.H. Zhu, H.L. Guo, SINOPEC, Shanghai/CHN
17.06.2015
11:00,
Illusion 2
CMF BiobasedWorld - Bioprocesses
Monitoring and modelling (K. Preuß, TH Mittelhessen, Gießen/D)
Process Raman spectroscopy for in-line monitoring of dynamic cell cultures in real time
C. Uerpmann, A. Pitters, Kaiser Optical Systems SARL, Lyon/F
17.06.2015
11:00,
Panorama 2
Forum, Level 1 BiobasedWorld - Microalgae biorefinery
(P. Lopez, University Complutense of Madrid/E)
Sustainable bioenergy production by combining microalgae culture and anaerobic treatment of domestic wastewater
I. de Godos Crespo, FCC aqualia, Chiclana de la Frontera, Cádiz/E; Z. Arbib, FCC aqualia, Chiclana de la Frontera/E; B. Llamas Moya, FCC aqualia, Madrid/E; E. Lara Corona, FCC aqualia, Sevilla/E; F. Rogalla, FCC aqualia, Madrid/E Cancelled by the author
17.06.2015
11:00,
Panorama 1
Forum, Level 1 Developments in desalination
(H. Glade, University of Bremen/D)
Innovative UF membranes in challenging sea water
T. Bittinger, J. Wunram, P. Buchta, R. Winkler, inge GmbH, Greifenberg/D
17.06.2015
11:00,
Fantasie 1
CMF Risk Assessment and Sustainability in the Focus of Lab Planning
(B. Winter, Merzig/D; E. Dittrich, EGNATON e.V., Bensheim/D)
EGNATON training target for groups - trigger presentation
P. Neurieder, Max-Planck-Society, Munich/D
17.06.2015
11:00,
Panorama 3
Forum, Level 1 Materials
Materials (J. Heinemann, TU Darmstadt/D)
CPVC piping systems in demanding industrial applications
P. Kilburn, Lubrizol Advanced Materials Europe BVBA, Brussels/B
17.06.2015
11:00,
Spektrum
CMF International powder and nanotechnology forum
Nano-bio technology and microreactor (S. Mathur, University of Cologne/D; M. Miyahara, Kyoto University/J)
Chemical and process-design intensification and use for micro-flow particle synthesis
V. Hessel, T. Noel, Q. Wang, Eindhoven University of Technology/NL
17.06.2015
11:00,
Illusion 1
CMF Reaction engineering
Reactor design (R.W. Fischer, Clariant Produkte (Deutschland) GmbH, Bruckmühl/D and TU München/D)
From lab- to pilot-scale: scale-up and optimization of fast pyrolysis for biomass upgrading
A. Funke, N. Dahmen, J. Sauer, Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen/D
17.06.2015
11:00,
Conclusio 2
CMF Falsified Medicines Directive
Aktuelles zur EU-Richtlinie zum Schutz vor Arzneimittelfälschung (M. Bergen, securPharm e.V., Frankfurt/D)
Praktische Umsetzung der Falsified Medicines Directive in Deutschland
T. Beer, ACS PharmaProtect GmbH, Berlin/D
17.06.2015
11:00,
Consens
Hall 4.C Nickel alloys, titanium and zirconium in the chemical process industry *
(K.-G. Schütze, Evonik Industries AG, Hanau/D and H. Alves, VDM Metals GmbH, Werdohl/D)

* organised by VDM Metals GmbH
New challenges in use of well-known nickel alloys in CPI related to global sourcing strategies in developing markets
K. Schweier, B. Lorsbach, Bayer Technology Services GmbH, Leverkusen/D
17.06.2015
11:10,
Facette
Hall 3 VIA West ACHEMA Praxis Forum
Pharmaceutical production (J. Groll, University of Würzburg/D)
Scaling-up stem cell manufacturing
J. Castillo, T. Bovy, Pall Life Sciences, Brussels/B
17.06.2015
11:10,
Brillanz
Hall 4.2 ACHEMA Praxis Forum
Laboratory techniques (H. Philipp, BASF SE, Ludwigshafen/D; T. Gasdorf, BROEN A/S, Bedburg/D)
Efficient air control concepts for innovative laboratories
B. Schoeler, Waldner Laboreinrichtungen GmbH & Co.KG, Wangen/D
17.06.2015
11:10,
Logos/Genius
Hall 9.1 ACHEMA Praxis Forum
Industrial and labour safety (L. Allford, European Process Safety Centre (EPSC), Rugby/UK)
Compact safety solution
M. Garbsch, JUMO GmbH & Co. KG, Fulda/D Cancelled by the author
17.06.2015
11:10,
Granat
Hall 11.0 ACHEMA Praxis Forum
Innovative process analytical technology (M. Maiwald, Federal Institute for Materials Research and Testing - BAM, Berlin/D; M. Hajduk, Evonik Industries AG, Hanau/D)
A miniaturized flame ionization detector in silicon-glass or multilayer ceramic microsystems technology
W. Kuipers, KROHNE Messtechnik GmbH, Duisburg/D; C. Koch, KROHNE Innovation GmbH, Duisburg/D; M. Deilmann, KROHNE Messtechnik GmbH, Duisburg/D; C. Lenz, S. Ziesche, Fraunhofer IKTS, Dresden/D
17.06.2015
11:30,
Analog
Forum, Level 0 Industrial water management
Treatment of complex wastewaters (C. Weidlich, DECHEMA-Forschungsinstitut (DFI), Frankfurt/D)
Application of glow discharge plasma for the removal of phenolic components from chemical industry wastewater
R. Dewil, B. Kerremans, S. Van Damme, K.U. Leuven, Sint-Katelijne-Waver/B
17.06.2015
11:30,
Logos/Genius
Hall 9.1 ACHEMA Praxis Forum
Industrial and labour safety (L. Allford, European Process Safety Centre (EPSC), Rugby/UK)
How to prevent the electrostatic charging of processing equipment situated in flammable and combustible (ATEX) atmospheres
M. O'Brien, Newson Gale, Nottingham/UK
17.06.2015
11:30,
Fantasie 2
CMF Energy efficient processes
Thermal energy storage and recovery (M. Molenda, Deutsches Zentrum für Luft- und Raumfahrt (DLR), Stuttgart/D)
The combined use of powder circulation and encapsulated phase change materials in concentrated solar power plants
H. Zhang, J. Degrève, KU Leuven, Heverlee/B; J. Baeyens, University of Warwick, Coventry/UK
17.06.2015
11:30,
Facette
Hall 3 VIA West ACHEMA Praxis Forum
Pharmaceutical production (J. Groll, University of Würzburg/D)
Drop pelletizing of low viscous material
B. Kampfmann, H. Müller, R.-K. Mürb, M. Nieder, S. Deiss, Automatik Plastics Machinery, Grossostheim/D
17.06.2015
11:30,
Illusion 1
CMF Reaction engineering
Reactor design (R.W. Fischer, Clariant Produkte (Deutschland) GmbH, Bruckmühl/D and TU München/D)
Design and scale-up of multitubular reactors
M. Matzopoulos, B. de Groot, H. Mumtaz, M. Patel, Process Systems Enterprise, London/UK
17.06.2015
11:30,
Conclusio 2
CMF Falsified Medicines Directive
Aktuelles zur EU-Richtlinie zum Schutz vor Arzneimittelfälschung (M. Bergen, securPharm e.V., Frankfurt/D)
DataMatrix sprengt Grenzen - "Neue Wege der Automatischen Identifikation für Kennzeichnung serialisierter Packungen - Neues aus der Normierung, Rechteck-Codes, Lieferdaten und Internetadresse im Code"
H. Oehlmann, European Health Industry Business Communication Council, Naumburg/D
17.06.2015
11:30,
Conclusio 1
CMF Catalysis
(N. Bogolowski, DECHEMA-Forschungsinstitut (DFI), Frankfurt/D)
Catalytic engineering: reduction of metal catalyst losses in reactors via hydrazine technology
T. Hemben, University of Phoenix, Lincoln Park/USA
17.06.2015
11:30,
Granat
Hall 11.0 ACHEMA Praxis Forum
Innovative process analytical technology (M. Maiwald, Federal Institute for Materials Research and Testing - BAM, Berlin/D; M. Hajduk, Evonik Industries AG, Hanau/D)
On-line TOC monitoring in GMP parts washers
O. Van Houtte, M. Dion, STERIS Canada Corporation, Quebec City/CDN; G. Verghese, STERIS Corporation, Saint Louis, MO/USA
17.06.2015
11:30,
Brillanz
Hall 4.2 ACHEMA Praxis Forum
Laboratory techniques (H. Philipp, BASF SE, Ludwigshafen/D; T. Gasdorf, BROEN A/S, Bedburg/D)
Don't gamble with physical properties
S. Hauke, S. Loew, B. Häfner, A. Ohligschläger, Siemens AG, Frankfurt am Main/D
17.06.2015
11:30,
Consens
Hall 4.C Nickel alloys, titanium and zirconium in the chemical process industry *
(K.-G. Schütze, Evonik Industries AG, Hanau/D and H. Alves, VDM Metals GmbH, Werdohl/D)

* organised by VDM Metals GmbH
Nickel alloys in chemical processes at DSM - Practical examples
T. Wellauer, DSM Nutritional Products AG, Sisseln/CH
17.06.2015
11:30,
Panorama 2
Forum, Level 1 BiobasedWorld - Microalgae biorefinery
(P. Lopez, University Complutense of Madrid/E)
Facilitating microalgae production and biorefineries through the introduction of Industrial Symbiosis concepts
P. Møller, Kalundborg Municipality/DK
17.06.2015
11:30,
Illusion 3
CMF Safety
Human and organizational factors (J. Kuboth, Landesamt für Natur, Umwelt und Verbraucherschutz Nordrhein-Westfalen (LANUV), Essen/D)
Achieving process safety by supporting plant personnel in emergency situations
U. Fischbach, Arbeitsschutz, Umweltschutz und Anlagensicherheit, Oberwil/CH
17.06.2015
11:30,
Illusion 2
CMF BiobasedWorld - Bioprocesses
Monitoring and modelling (K. Preuß, TH Mittelhessen, Gießen/D)
Next generation bioprocess control
K. Voll, Eppendorf, Inc., Enfield, CT/USA
17.06.2015
11:30,
Spektrum
CMF International powder and nanotechnology forum
Nano-bio technology and microreactor (S. Mathur, University of Cologne/D; M. Miyahara, Kyoto University/J)
Morphology control of Lithium ion battery electrode with nano materials by using continuous kneading process
T. Fukui, KURIMOTO, Ltd., Osaka/J
17.06.2015
11:30,
Agenda
Forum, Level 0 Mixing and separation technology
Fluid-solid (U. Esser, Bayer Technology Services GmbH, Leverkusen/D)
Dielectrophoresis - a promising technology for continuous particles fractionation
F. Du, Y. Wang, G. Pesch, M. Baune, J. Thöming, University of Bremen/D
17.06.2015
11:30,
Panorama 3
Forum, Level 1 Materials
Materials (J. Heinemann, TU Darmstadt/D)
Compatibility of metallic tank and polymeric sealing materials with biofuels
M. Weltschev, R. Bäßler, Federal Institute for Materials Research and Testing (BAM), Berlin/D
17.06.2015
11:30,
Fantasie 1
CMF Risk Assessment and Sustainability in the Focus of Lab Planning
(B. Winter, Merzig/D; E. Dittrich, EGNATON e.V., Bensheim/D)
Sustainable planning process of research buildings
S. Borger, University of Zurich/CH
17.06.2015
11:30,
Panorama 1
Forum, Level 1 Developments in desalination
(H. Glade, University of Bremen/D)
Small-scale efficient seawater reverse osmosis plants
M. Beery, J. Ludwig, L. León, akvolution GmbH, Berlin/D
17.06.2015
11:50,
Granat
Hall 11.0 ACHEMA Praxis Forum
Innovative process analytical technology (M. Maiwald, Federal Institute for Materials Research and Testing - BAM, Berlin/D; M. Hajduk, Evonik Industries AG, Hanau/D)
Fiber-optical process analytical technology in bioreactors
M. Sandmann, M. Münzberg, L. Bressel, R. Hass, J. Mießner, O. Reich, University of Potsdam/D
17.06.2015
11:50,
Facette
Hall 3 VIA West ACHEMA Praxis Forum
Pharmaceutical production (J. Groll, University of Würzburg/D)
Cleaning in place (CIP) of adhesive solutions. What has to be kept in mind?
S. Moll, io-consultants, Heidelberg/D
17.06.2015
11:50,
Brillanz
Hall 4.2 ACHEMA Praxis Forum
Laboratory techniques (H. Philipp, BASF SE, Ludwigshafen/D; T. Gasdorf, BROEN A/S, Bedburg/D)
Conversion of existing material locks to decontamination locks
J. Ortner, Ortner Reinraumtechnik GmbH, Villach/A
17.06.2015
11:50,
Logos/Genius
Hall 9.1 ACHEMA Praxis Forum
Industrial and labour safety (L. Allford, European Process Safety Centre (EPSC), Rugby/UK)
Does explosion protection exclude fire protection from inflammable dusts? Definitely NO using the example of our filter technology!
K. Rabenstein, Herding GmbH Filtertechnik, Amberg/D
17.06.2015
12:00,
Panorama 3
Forum, Level 1 Materials
Materials (J. Heinemann, TU Darmstadt/D)
Compatibility of materials and wall coatings for VHP decontamination
G. Lauth, STERIS Deutschland GmbH, Köln/D
17.06.2015
12:00,
Illusion 2
CMF BiobasedWorld - Bioprocesses
Monitoring and modelling (K. Preuß, TH Mittelhessen, Gießen/D)
Chromatography Analysis and Design Toolkit (CADET)
S. Leweke, E. von Lieres, Forschungszentrum Jülich/D
17.06.2015
12:00,
Fantasie 2
CMF Energy efficient processes
Thermal energy storage and recovery (M. Molenda, Deutsches Zentrum für Luft- und Raumfahrt (DLR), Stuttgart/D)
Optimal thermal energy storage integration in batch processes using pinch analysis
D. Olsen, T. Eiholzer, P. Liem, B. Wellig, Lucerne University of Applied Sciences and Arts, Horw/CH
17.06.2015
12:00,
Conclusio 2
CMF Falsified Medicines Directive
Aktuelles zur EU-Richtlinie zum Schutz vor Arzneimittelfälschung (M. Bergen, securPharm e.V., Frankfurt/D)
Herausforderungen und Umsetzung der Serialisierung in einer Verpackungslinie
V. Ditscher, OCS Checkweighers GmbH, Schwäbisch Hall/D
17.06.2015
12:00,
Agenda
Forum, Level 0 Mixing and separation technology
Fluid-solid (U. Esser, Bayer Technology Services GmbH, Leverkusen/D)
A new device for coupling of calorimetric and volumetric equilibrium measurements
C. Bläker, M. Luckas, C. Pasel, D. Bathen, University of Duisburg-Essen/D
17.06.2015
12:00,
Consens
Hall 4.C Nickel alloys, titanium and zirconium in the chemical process industry *
(K.-G. Schütze, Evonik Industries AG, Hanau/D and H. Alves, VDM Metals GmbH, Werdohl/D)

* organised by VDM Metals GmbH
Suitability of nickel alloys and titanium for applications in acids at 200 °C
R. Bäßler, BAM - Federal Institute for Materials Research and Testing, Berlin/D; C. Schmidt, VDM Metals GmbH, Altena/D; H. Alves, VDM Metals GmbH, Werdohl/D
17.06.2015
12:00,
Panorama 1
Forum, Level 1 Developments in desalination
(H. Glade, University of Bremen/D)
Reverse osmosis testings: being as representative as possible in the lab scale
A. Kempter, S. Sujandi, R.P. Baumann, M. Kellermeier, K. Odiot, BASF SE, Ludwigshafen/D Cancelled by the author
17.06.2015
12:00,
Fantasie 1
CMF Risk Assessment and Sustainability in the Focus of Lab Planning
(B. Winter, Merzig/D; E. Dittrich, EGNATON e.V., Bensheim/D)
Certifications and EPDs - necessity or dispensable
K. Kreuzer, Lab Concept GmbH, Lauben/D
17.06.2015
12:00,
Spektrum
CMF International powder and nanotechnology forum
Nano-bio technology and microreactor (S. Mathur, University of Cologne/D; M. Miyahara, Kyoto University/J)
Chemical nanotechnologies: from molecules to functional nanostructures for energy and health applications
S. Mathur, University of Cologne, Cologne/D
17.06.2015
12:00,
Analog
Forum, Level 0 Industrial water management
Treatment of complex wastewaters (C. Weidlich, DECHEMA-Forschungsinstitut (DFI), Frankfurt/D)
Electrochemical wastewater treatment for industrial applications
D. Woisetschläger, B. Humpl, VTU Engineering GmbH, Grambach/A; M. Siebenhofer, Institute of Chemical Engineering and Environmental Technology, Graz/A; M. Koncar, W. Glasl, VTU Engineering GmbH, Grambach/A
17.06.2015
12:00,
Conclusio 1
CMF Catalysis
(N. Bogolowski, DECHEMA-Forschungsinstitut (DFI), Frankfurt/D)
Catalyst deactivation in high performance slurry reactors
N. Drefs, G. Kettenbach, T. Blocher, Buss ChemTech AG, Pratteln/CH
17.06.2015
12:00,
Illusion 3
CMF Safety
Human and organizational factors (J. Kuboth, Landesamt für Natur, Umwelt und Verbraucherschutz Nordrhein-Westfalen (LANUV), Essen/D)
Building an effective process safety culture
F. Coumans, BST, Leuven/B
17.06.2015
12:00,
Panorama 2
Forum, Level 1 BiobasedWorld - Microalgae biorefinery
(P. Lopez, University Complutense of Madrid/E)
Constraint-based metabolic modeling: applications on microalgae biotechnology and beyond
J. Nogales Enrique, Centro de Investigaciones Biologicas (CSIC), Madrid/E
17.06.2015
12:00,
Illusion 1
CMF Reaction engineering
Reactor design (R.W. Fischer, Clariant Produkte (Deutschland) GmbH, Bruckmühl/D and TU München/D)
Selective microwave heating: a route to differentiated and intensified industrial chemical / material manufacturing
D. Irvine, S. Kingman, P. Palade, C. Dodds, S. Ison, University of Nottingham/UK
17.06.2015
12:10,
Logos/Genius
Hall 9.1 ACHEMA Praxis Forum
Industrial and labour safety (L. Allford, European Process Safety Centre (EPSC), Rugby/UK)
Safe disinfection with flammable solvents in pharmaceutical production
M. Steinkrauss, O. Heinrich, C. Kubainsky, E. Huxol, Swissi Process Safety GmbH, Basel/CH
17.06.2015
12:10,
Facette
Hall 3 VIA West ACHEMA Praxis Forum
Pharmaceutical production (J. Groll, University of Würzburg/D)
Advantages and applications of VHP low temperature terminal surface sterilization for pharmaceutical manufacturing processes and products
J. Mattila, STERIS Finn-Aqua, Tuusula/FIN
17.06.2015
12:10,
Brillanz
Hall 4.2 ACHEMA Praxis Forum
Laboratory techniques (H. Philipp, BASF SE, Ludwigshafen/D; T. Gasdorf, BROEN A/S, Bedburg/D)
Storage of hazardous materials in 21st century laboratories
S. Kunkel, asecos GmbH, Gründau/D
17.06.2015
12:10,
Granat
Hall 11.0 ACHEMA Praxis Forum
Innovative process analytical technology (M. Maiwald, Federal Institute for Materials Research and Testing - BAM, Berlin/D; M. Hajduk, Evonik Industries AG, Hanau/D)
In-line particle size measurement of pellet fluidized bed coating in laboratory and pilot scale
D. Wiegel, Anhalt University, Bernburg/D; G. Eckardt, Parsum GmbH, Chemnitz/D; M. Guttzeit, M. Jacob, Glatt GmbH, Weimar/D; B. Wolf, Anhalt University, Bernburg/D
17.06.2015
12:30,
Illusion 3
CMF Safety
Human and organizational factors (J. Kuboth, Landesamt für Natur, Umwelt und Verbraucherschutz Nordrhein-Westfalen (LANUV), Essen/D)
The impact of the operator on plant safety
G. Fernholz, Schneider Electric, Neuss/D
17.06.2015
12:30,
Spektrum
CMF International powder and nanotechnology forum
Nano-bio technology and microreactor (S. Mathur, University of Cologne/D; M. Miyahara, Kyoto University/J)
Nano and fine particles surface design for aggregation and dispersion behavior control in liquid to apply various functional material
H. Kamiya, Tokyo University of Agriculture and Technology, Koganei/J; M. Iijima, Yokohama National University/J
17.06.2015
12:30,
Facette
Hall 3 VIA West ACHEMA Praxis Forum
Pharmaceutical production (J. Groll, University of Würzburg/D)
Risks of using spare parts from suppliers rather than from the OEM in the tablet production
S. Deol, Fette Compacting, Schwarzenbek/D
17.06.2015
12:30,
Illusion 2
CMF BiobasedWorld - Bioprocesses
Monitoring and modelling (K. Preuß, TH Mittelhessen, Gießen/D)
Oscillating oxygen and substrate supply conditions trigger metabolic regulation in C. glutamicum
M. Limberg, T. Aryani, W. Wiechert, M. Oldiges, Forschungszentrum Jülich GmbH/D
17.06.2015
12:30,
Agenda
Forum, Level 0 Mixing and separation technology
Fluid-solid (U. Esser, Bayer Technology Services GmbH, Leverkusen/D)
A new concept of melt layer crystallization for high viscous feed streams
F.J. Eisenbart, J. Ulrich, University Halle-Wittenberg/D
17.06.2015
12:30,
Fantasie 2
CMF Energy efficient processes
Thermal energy storage and recovery (M. Molenda, Deutsches Zentrum für Luft- und Raumfahrt (DLR), Stuttgart/D)
A decision supporting methodology for heat integration and total site targeting of chemical processes
T. Bohnenstädt, G. Fieg, Hamburg University of Technology/D
17.06.2015
12:30,
Fantasie 1
CMF Risk Assessment and Sustainability in the Focus of Lab Planning
(B. Winter, Merzig/D; E. Dittrich, EGNATON e.V., Bensheim/D)
Design of particular building engineering devices if the user is still unknown when planning with respect of OHS
P. Dockx, Van Looy Group NV, Antwerp/B
17.06.2015
12:30,
Granat
Hall 11.0 ACHEMA Praxis Forum
Innovative process analytical technology (M. Maiwald, Federal Institute for Materials Research and Testing - BAM, Berlin/D; M. Hajduk, Evonik Industries AG, Hanau/D)
PAT in bioprocess development - a strategy for more efficiency and higher product quality
S. Zelle, Eppendorf AG - Bioprocess Center Europe, Jülich/D
17.06.2015
12:30,
Panorama 2
Forum, Level 1 BiobasedWorld - Microalgae biorefinery
(P. Lopez, University Complutense of Madrid/E)
Microalgal biomass harvesting through drainage
P. Lopez, University Complutense of Madrid/E; C. Reparez, Everis Energia y Medioambiente, Madrid/E; C. Negro, University Complutense of Madrid/E
17.06.2015
12:30,
Consens
Hall 4.C Nickel alloys, titanium and zirconium in the chemical process industry *
(K.-G. Schütze, Evonik Industries AG, Hanau/D and H. Alves, VDM Metals GmbH, Werdohl/D)

* organised by VDM Metals GmbH
Properties of two new corrosion resistant nickel-alloys
R. Behrens, VDM Metals GmbH, Altena/D
17.06.2015
12:30,
Illusion 1
CMF Reaction engineering
Reactor design (R.W. Fischer, Clariant Produkte (Deutschland) GmbH, Bruckmühl/D and TU München/D)
Multi-purpose plants - planning according to their own special rules
T. Harlacher, InfraServ GmbH & Co. Knapsack KG, Hürth/D
17.06.2015
12:30,
Analog
Forum, Level 0 Industrial water management
Treatment of complex wastewaters (C. Weidlich, DECHEMA-Forschungsinstitut (DFI), Frankfurt/D)
Full-scale sequencing batch reactor design and operation for treatment of target compounds from a pharmaceutical facility
J. Devine, Alfa Laval Ashbrok Simon Hartley, Houston, TX/USA; J.G. Cleary, HDR Inc., Mahweh, NJ/USA
17.06.2015
12:30,
Panorama 1
Forum, Level 1 Developments in desalination
(H. Glade, University of Bremen/D)
Seawater desalination using membrane distillation: a comprehensive investigation based on two pilot plants
A. Hagedorn, G. Fieg, Hamburg University of Technology (TUHH)/D; F. Groß, J. Koschikowski, Fraunhofer ISE, Freiburg/D; T. Mann, MAHLE Industrial Filtration GmbH, Hamburg/D
17.06.2015
12:30,
Conclusio 1
CMF Catalysis
(N. Bogolowski, DECHEMA-Forschungsinstitut (DFI), Frankfurt/D)
New routes for syngas production - DryReforming at elevated pressure
A. Behrens, N. Schödel, S. Hoffmann, Linde AG, Pullach/D; E. Schwab, A. Milanov, S. Altwasser, BASF SE, Ludwigshafen/D; S.A. Schunk, G. Wasserschaff, hte GmbH, Heidelberg/D
17.06.2015
12:30,
Conclusio 2
CMF Falsified Medicines Directive
Aktuelles zur EU-Richtlinie zum Schutz vor Arzneimittelfälschung (M. Bergen, securPharm e.V., Frankfurt/D)
Verwendung der Tamper Verification Features als Sicherheitsmerkmal
T. Brückner, Bundesverband der Pharmazeutischen Industrie e.V., Berlin/D
17.06.2015
12:30,
Logos/Genius
Hall 9.1 ACHEMA Praxis Forum
Industrial and labour safety (L. Allford, European Process Safety Centre (EPSC), Rugby/UK)
Emission reduction and explosion risk minimization
D. Moncalvo, M. Davies, PROTEGO - Braunschweiger Flammenfilter GmbH/D
17.06.2015
12:30,
Panorama 3
Forum, Level 1 Materials
Materials (J. Heinemann, TU Darmstadt/D)
PTFE and PTFE compounds for sealing applications in plant engineering of the chemical industry
R. Veenendaal, Dyneon B.V., Kerkrade/NL; W. Neumann, Dyneon GmbH, Burgkirchen/D
17.06.2015
12:50,
Facette
Hall 3 VIA West ACHEMA Praxis Forum
Pharmaceutical production (J. Groll, University of Würzburg/D)
Single-use systems integrity testing: a practical approach
H. Pora, Pall Life Sciences, St Germain en Laye/F
17.06.2015
12:50,
Granat
Hall 11.0 ACHEMA Praxis Forum
Innovative process analytical technology (M. Maiwald, Federal Institute for Materials Research and Testing - BAM, Berlin/D; M. Hajduk, Evonik Industries AG, Hanau/D)
Stand-off methane leakage detection for biogas plants
J. Herbst, F. Axtmann, J. Erb, A. Lambrecht, Fraunhofer IPM, Freiburg/D
17.06.2015
12:50,
Logos/Genius
Hall 9.1 ACHEMA Praxis Forum
Industrial and labour safety (L. Allford, European Process Safety Centre (EPSC), Rugby/UK)
Explosion protection concepts with flame arresters
T. Heidermann, PROTEGO - Braunschweiger Flammenfilter GmbH/D
17.06.2015
14:00,
Consens
Hall 4.C Nickel alloys, titanium and zirconium in the chemical process industry *
(M. Renner, Asset & Corrosion Management Consultancy, Leverkusen/D and H. Alves, VDM Metals GmbH, Werdohl/D)

* organised by VDM Metals GmbH
New chemical processes; a challenge for material selection
K.-G. Schütze, Evonik Industries AG, Hanau/D
17.06.2015
14:30,
Dimension
Hall 4.2 NANORA
(C. Steinbach, DECHEMA e.V., Frankfurt/D)
Welcome
A. Förster, DECHEMA e.V., Frankfurt/D
17.06.2015
14:30,
Consens
Hall 4.C Nickel alloys, titanium and zirconium in the chemical process industry *
(M. Renner, Asset & Corrosion Management Consultancy, Leverkusen/D and H. Alves, VDM Metals GmbH, Werdohl/D)

* organised by VDM Metals GmbH
Performance of high alloyed steels and nickel alloys under highly sour conditions in the presence of elemental sulfur
G. Schmitt, IFINKOR - Institute for Maintenance and Corrosion Protection Technologies n.f.p.-Ltd., Iserlohn/D
17.06.2015
14:40,
Dimension
Hall 4.2 NANORA
(C. Steinbach, DECHEMA e.V., Frankfurt/D)
Regional activities for European success
S. Hummel, Hessisches Ministerium für Wirtschaft, Energie, Verkehr und Landesentwicklung, Wiesbaden/D
17.06.2015
15:00,
Illusion 3
CMF Process Safety Vision 20/20
(S. Kadri, Center for Chemical Process Safety - CCPS, New York, NY/USA)
Committed culture
C. Cowley, Cowley Associates, Leigh/UK
17.06.2015
15:00,
Illusion 2
CMF BiobasedWorld - Bioprocesses
Downstream processing (N. Tippkötter, TU Kaiserslautern/D)
A unified process development strategy for batch and continuous chromatography
K. Lacki, A. Forss, R. Nordberg, GE Healthcare Life Sciences, Uppsala/S
17.06.2015
15:00,
Facette
Hall 3 VIA West ACHEMA Praxis Forum
Pharmaceutical production (R. Ditz, TU Clausthal/D)
Flexible facilities - today and tomorrow
F. Nygaard, NNE Pharmaplan, Gentofte/DK
17.06.2015
15:00,
Analog
Forum, Level 0 Industrial water management
Recovery of valuables from wastewater (P. Moller, Kalundborg Kommune/DK)
Nutrient recovery by novel membrane stripping
J. Pereboom, L. Van Dijk, L. Luning, Sustec Consulting & Contracting, Wageningen/NL
17.06.2015
15:00,
Conclusio 1
CMF Catalysis
(S. Schunk, hte GmbH, Heidelberg/D)
Catalyzing energy research - polymers and other materials as examples
A. Abou-Hamdan, Chemspeed Technologies AG, Augst/CH
17.06.2015
15:00,
Panorama 2
Forum, Level 1 Latest insight on lignocellulosic biorefineries
(M. Patel, University of Geneva/I)
The investigation of biomass sugar as the feedstock for PlantBottle packaging
M. Schultheis, The Coca-Cola Company, Atlanta, GA/USA; H. Ren, The Coca-Cola Company, Shanghai/CHN; K. Stadler, The Coca-Cola Company, Berlin/D
17.06.2015
15:00,
Logos/Genius
Hall 9.1 ACHEMA Praxis Forum
Industrial and labour safety (T. Sinner, Merck KGaA, Darmstadt/D)
Overview of basic principles of explosion protection with a focus on explosion protection type Intrinsic Safety Ex i and new requirements
H. Kaeuper, Phoenix Contact Electronics GmbH, Bad Pyrmont/D
17.06.2015
15:00,
Granat
Hall 11.0 ACHEMA Praxis Forum
Innovative process analytical technology (A. Lambrecht, Fraunhofer IPM, Freiburg/D; B. Hitzmann, University of Hohenheim/D)
Fast NIR spectroscopy of surfaces using super continuum light sources
M. Pfeifer, S. Fieberg, B. Halford, F. Kühnemann, A. Lambrecht, Fraunhofer IPM, Freiburg/D
17.06.2015
15:00,
Illusion 1
CMF Reaction engineering
Special reactors (U. Kragl, University of Rostock/D)
Introduction latest twin screw continuous processor for reacting, mixing, kneading and evaporating
Y. Yoshiyama, KURIMOTO, LTD., Osaka/J
17.06.2015
15:00,
Conclusio 2
CMF Worldwide best practices in eco-efficient construction and management of chemical parks
(H. Nover, European Chemical Regions Network (ECRN), Brussels/B)
The future of the chemical industry: megatrends and their implications for chemical industry and chemical parks
H. Utikal, Provadis Hochschule, Frankfurt/D
17.06.2015
15:00,
Fantasie 2
CMF Energy efficient processes
Thermal energy storage and recovery (A. Wörner, Deutsches Zentrum für Luft- und Raumfahrt (DLR), Stuttgart/D)
Energy recovery from process exhaust streams
G. Ronco, Spirax Sarco, Cheltenham/UK
17.06.2015
15:00,
Brillanz
Hall 4.2 ACHEMA Praxis Forum
Laboratory techniques (M. Maucher, WALDNER Laboreinrichtungen GmbH & Co.KG, Wangen/D)
Sustainable laboratories - selecting energy efficient lab equipment
S. Springer, Waldner Laboreinrichtungen GmbH & Co.KG, Wangen/D
17.06.2015
15:00,
Consens
Hall 4.C Nickel alloys, titanium and zirconium in the chemical process industry *
(M. Renner, Asset & Corrosion Management Consultancy, Leverkusen/D and H. Alves, VDM Metals GmbH, Werdohl/D)

* organised by VDM Metals GmbH
Fabrication experience with nickel alloys and reactive metals
W. Hofmann, ASE Apparatebau GmbH, Chemnitz/D
17.06.2015
15:00,
Dimension
Hall 4.2 NANORA
(C. Steinbach, DECHEMA e.V., Frankfurt/D)
Developments in nanotechnologies and advanced materials: a European perspective and innovation strategy
C. Tokamanis, European Commission, Brüssel/B
17.06.2015
15:00,
Agenda
Forum, Level 0 Plant control
Process automation and new software tools (M. Wiedau, RWTH Aachen/D)
Plant asset management in the process industry
-reality and future trends

S. Gampp, Endress+Hauser Messtechnik GmbH+Co. KG, Weil am Rhein/D
17.06.2015
15:00,
Fantasie 1
CMF Risk Assessment and Sustainability in the Focus of Lab Planning
(H. Philipp, BASF SE, Ludwigshafen/D; P. Dockx, Van Looy Group, Antwerp/B)
Specific risks of vivariums and restrictions when planning
I. Müller-Stahn, dr. heinekamp Labor- und Institutsplanung GmbH, Karlsfeld/D
17.06.2015
15:00,
Spektrum
CMF International powder and nanotechnology forum
Pharmaceutical technology (H. Takeuchi, Gifu Pharmaceutical University/J; H. Yamamoto, Aichi Gakuin University, Nagoya/J)
Coupling biorelevant release testing with PBPK modelling to predict in vivo drug performance after oral administration
J. Dressman, University of Frankfurt/D
17.06.2015
15:00,
Panorama 3
Forum, Level 1 Materials
Powders, foams, composites (M. Weyd, Fraunhofer IKTS, Hermsdorf/D)
Development of application tailored multi-scale sized powders
P.J. Masset, M. Méry, C. Schmetterer, G. Wolf, Fraunhofer UMSICHT, Sulzbach-Rosenberg/D
17.06.2015
15:00,
Panorama 1
Forum, Level 1 Developments in desalination
(H. Glade, University of Bremen/D)
Salt production: praxis orientated zero liquid discharge
N. Heyn, Terrawater GmbH, Kiel/D
17.06.2015
15:20,
Facette
Hall 3 VIA West ACHEMA Praxis Forum
Pharmaceutical production (R. Ditz, TU Clausthal/D)
Validation in the life cycle of pharmaceutical production
and the new annex 15

H. Fabritz, NNE Pharmaplan, Bad Homburg/D
17.06.2015
15:20,
Brillanz
Hall 4.2 ACHEMA Praxis Forum
Laboratory techniques (M. Maucher, WALDNER Laboreinrichtungen GmbH & Co.KG, Wangen/D)
Tips and tricks for cultivation in microtitre plates
D. Bruecher, Infors AG, Bottmingen/CH Cancelled by the author
17.06.2015
15:20,
Logos/Genius
Hall 9.1 ACHEMA Praxis Forum
Industrial and labour safety (T. Sinner, Merck KGaA, Darmstadt/D)
Advances in rupture disc detection: from membrane to magnetic
R. Trotter, M. Cislaghi, Elfab Ltd, Tyne & Wear/UK
17.06.2015
15:20,
Granat
Hall 11.0 ACHEMA Praxis Forum
Innovative process analytical technology (A. Lambrecht, Fraunhofer IPM, Freiburg/D; B. Hitzmann, University of Hohenheim/D)
Photoacoustic measurement system for monitoring of the CO/CO2- ratio during the pig iron production
A. Eberhardt, University of Freiburg/D; S. Rademacher, A. Kürzinger, Fraunhofer IPM, Freiburg/D; S. Palzer, University of Freiburg/D; J. Wöllenstein, Fraunhofer IPM, Freiburg/D
17.06.2015
15:25,
Conclusio 2
CMF Worldwide best practices in eco-efficient construction and management of chemical parks
(H. Nover, European Chemical Regions Network (ECRN), Brussels/B)
Chemical parks as regional engines for value creation: some international case studies
D.A. Gottschald, Chemie-Cluster Bayern, Munich/D
17.06.2015
15:30,
Spektrum
CMF International powder and nanotechnology forum
Pharmaceutical technology (H. Takeuchi, Gifu Pharmaceutical University/J; H. Yamamoto, Aichi Gakuin University, Nagoya/J)
Cocrystal formation and thermal behaviors based on binary phase diagrams
K. Terada, Toho University, Funabashi/J
17.06.2015
15:30,
Illusion 3
CMF Process Safety Vision 20/20
(S. Kadri, Center for Chemical Process Safety - CCPS, New York, NY/USA)
Vibrant management systems
H.V. Schwarz, BASF SE, Ludwigshafen/D
17.06.2015
15:30,
Illusion 2
CMF BiobasedWorld - Bioprocesses
Downstream processing (N. Tippkötter, TU Kaiserslautern/D)
In-situ and downstream approaches for succinic and itaconic acid recovery
H. De Wever, W. Van Hecke, K. Elst, L. Garcia-Gonzalez, VITO, Mol/B
17.06.2015
15:30,
Agenda
Forum, Level 0 Plant control
Process automation and new software tools (M. Wiedau, RWTH Aachen/D)
Chemical plant analytics - find the fast track to increased profits & reduced process variability
J. Honga, Metso Automation Oy, Pietarsaari/FIN; M. Martin, North American Chemical Company, Houston, TX/USA; G. Buckbee, Metso Automation USA, Inc., Hartland, WI/USA
17.06.2015
15:30,
Panorama 3
Forum, Level 1 Materials
Powders, foams, composites (M. Weyd, Fraunhofer IKTS, Hermsdorf/D)
Plastics pelletizing technology - discover hidden efficiency
H. Mueller, F. Gloeckner, Automatik Plastics Machinery GmbH, Grossostheim/D
17.06.2015
15:30,
Fantasie 1
CMF Risk Assessment and Sustainability in the Focus of Lab Planning
(H. Philipp, BASF SE, Ludwigshafen/D; P. Dockx, Van Looy Group, Antwerp/B)
OHS and air exchange rates - is it really in contradiction with sustainability?
C. Herry, Erlab D.F.S S.A.S, Val de Reuil/F
17.06.2015
15:30,
Analog
Forum, Level 0 Industrial water management
Recovery of valuables from wastewater (P. Moller, Kalundborg Kommune/DK)
Recovery of carboxylic acids from effluents via extraction and reactive distillation
D. Painer, S. Lux, M. Siebenhofer, Graz University of Technology/A
17.06.2015
15:30,
Panorama 1
Forum, Level 1 Developments in desalination
(H. Glade, University of Bremen/D)
Polymer film heat exchanger for seawater desalination: falling film enhancement and fouling mitigation
C. Dreiser, L.J. Krätz, H.-J. Bart, University of Kaiserslautern/D
17.06.2015
15:30,
Conclusio 1
CMF Catalysis
(S. Schunk, hte GmbH, Heidelberg/D)
Effect of carbon support on oxygen reduction activity and corrosion resistance of Pt-based catalysts for middle-temperature DMFC
S. Mariappan, J.-F Drillet, DECHEMA-Forschungsinstitut, Frankfurt am Main/D
17.06.2015
15:30,
Panorama 2
Forum, Level 1 Latest insight on lignocellulosic biorefineries
(M. Patel, University of Geneva/I)
Environmental and economic performance of process alternatives for multi-feedstock cellulosic sugar production
J. Villegas, University of Geneva/CH; K. Harding, University of the Witwatersrand, Johannesburg/ZA; M. Patel, University of Geneva/CH
17.06.2015
15:30,
Dimension
Hall 4.2 NANORA
(C. Steinbach, DECHEMA e.V., Frankfurt/D)
Preparing the future
J. Put, Nanohouse, Sittard/NL
17.06.2015
15:30,
Illusion 1
CMF Reaction engineering
Special reactors (U. Kragl, University of Rostock/D)
Advanced flow reactor technology - industrial production made real
Y. Jiang, Corning Incorporated, NY/USA
17.06.2015
15:30,
Fantasie 2
CMF Energy efficient processes
Thermal energy storage and recovery (A. Wörner, Deutsches Zentrum für Luft- und Raumfahrt (DLR), Stuttgart/D)
The worlds's first 4-effect caustic evaporation system reduces steam consumption by 25%
T. Kovacs, Alfa Laval Corporate AB, Lund/S
17.06.2015
15:40,
Facette
Hall 3 VIA West ACHEMA Praxis Forum
Pharmaceutical production (R. Ditz, TU Clausthal/D)
The world´s first system with FOUNDATION fieldbus technology using device diagnostics according to NAMUR NE 107 principles in a pharmaceutical production environment
L. Klausmann, Endress+Hauser Process Solutions AG, Reinach/CH; J. Zobel, Novartis Pharma AG, Basel/CH; D. Brand, Endress+Hauser Process Solutions AG, Reinach/CH
17.06.2015
15:40,
Logos/Genius
Hall 9.1 ACHEMA Praxis Forum
Industrial and labour safety (T. Sinner, Merck KGaA, Darmstadt/D)
Software-based health and safety management
M. Becker, EcoIntense GmbH, Berlin/D
17.06.2015
15:40,
Granat
Hall 11.0 ACHEMA Praxis Forum
Innovative process analytical technology (A. Lambrecht, Fraunhofer IPM, Freiburg/D; B. Hitzmann, University of Hohenheim/D)
Modified onsite-sampling for the study of liquid and solid aerosols in compressed gas systems under process conditions
C. Rodewald, Pall GmbH, Bad Kreuznach/D
17.06.2015
15:40,
Brillanz
Hall 4.2 ACHEMA Praxis Forum
Laboratory techniques (M. Maucher, WALDNER Laboreinrichtungen GmbH & Co.KG, Wangen/D)
Emission of dust in a fume cupboard: introduction of a new containment test method
J. Liebsch, Juergen Liebsch – Forschung und Entwicklung, Weiler/D
17.06.2015
15:50,
Conclusio 2
CMF Worldwide best practices in eco-efficient construction and management of chemical parks
(H. Nover, European Chemical Regions Network (ECRN), Brussels/B)
The low carbon industrial park - meeting the challenge
J. Brady, North East Process Industry Cluster, Wilton/UK
17.06.2015
16:00,
Spektrum
CMF International powder and nanotechnology forum
Pharmaceutical technology (H. Takeuchi, Gifu Pharmaceutical University/J; H. Yamamoto, Aichi Gakuin University, Nagoya/J)
Novel pharmaceutical cocrystal consisting of paracetamol and trimethylglycine, a new promising cocrystal former
T. Fukami, Meiji Pharmaceutical University, Tokyo/J; T. Suzuki, Nihon University, Chiba/J; K. Tomono, Nihon Univeristy, Chiba/J
17.06.2015
16:00,
Illusion 3
CMF Process Safety Vision 20/20
(S. Kadri, Center for Chemical Process Safety - CCPS, New York, NY/USA)
Disciplined adherence to standards
M. Hoppenbrouwers, Du Pont De Nemours B.V., Dordrecht/NL
17.06.2015
16:00,
Conclusio 1
CMF Catalysis
(S. Schunk, hte GmbH, Heidelberg/D)
Recent achievements of quantum chemical simulations: CH-functionalization, polymer-catalysis, batteries
M. Checinski, A. Kulesza, K. Stier, CreativeQuantum GmbH, Berlin/D
17.06.2015
16:00,
Brillanz
Hall 4.2 ACHEMA Praxis Forum
Laboratory techniques (M. Maucher, WALDNER Laboreinrichtungen GmbH & Co.KG, Wangen/D)
COD analysis - new method vs. dichromate method
W. Arts, W. Genthe, LAR Process Analysers AG, Berlin/D
17.06.2015
16:00,
Analog
Forum, Level 0 Industrial water management
Recovery of valuables from wastewater (P. Moller, Kalundborg Kommune/DK)
Cultivation of microalgae in wastewater and conversion into a soil additive by hydrothermal carbonization
B. Hupfauf, M. Koch, A. Dumfort, M. Rupprich, Management Center Innsbruck/A; A. Bockreis, Universität Innsbruck/A
17.06.2015
16:00,
Facette
Hall 3 VIA West ACHEMA Praxis Forum
Pharmaceutical production (R. Ditz, TU Clausthal/D)
Sustainable facility design in the pharmaceutical industry
J. Trapl, M+W Group, Stuttgart/D
17.06.2015
16:00,
Consens
Hall 4.C Nickel alloys, titanium and zirconium in the chemical process industry *
(M. Renner, Asset & Corrosion Management Consultancy, Leverkusen/D and H. Alves, VDM Metals GmbH, Werdohl/D)

* organised by VDM Metals GmbH
Nickel alloys and Titanium clad plates for chemical and petrochemical applications
S. Pauly, Nobelclad Europe, Rivesaltes/F
17.06.2015
16:00,
Panorama 2
Forum, Level 1 Latest insight on lignocellulosic biorefineries
(M. Patel, University of Geneva/I)
Cellulosic ethanol: commercialization and application in biofuels and biochemicals
M. Rarbach, P. Corvo, C. Heikaus, Clariant Produkte (Deutschland) GmbH, Munich/D
17.06.2015
16:00,
Illusion 2
CMF BiobasedWorld - Bioprocesses
Downstream processing (N. Tippkötter, TU Kaiserslautern/D)
Simulated moving bed chromatography as an alternative capturing tool for bio-based chemicals
E. Haimer, Vogelbusch Biocommodities GmbH, Vienna/A
17.06.2015
16:00,
Fantasie 2
CMF Energy efficient processes
Thermal energy storage and recovery (A. Wörner, Deutsches Zentrum für Luft- und Raumfahrt (DLR), Stuttgart/D)
Storage and utilisation of high grade waste heat
C. Stiller, S. Hübner, A. Alekseev, Linde AG, Pullach/D
17.06.2015
16:00,
Panorama 3
Forum, Level 1 Materials
Powders, foams, composites (M. Weyd, Fraunhofer IKTS, Hermsdorf/D)
Ceramic foams - multifunctional player in the world of cellular materials
G. Standke, J. Adler, A. Fuessel, D. Boettge, Fraunhofer IKTS, Dresden/D
17.06.2015
16:00,
Dimension
Hall 4.2 NANORA
(C. Steinbach, DECHEMA e.V., Frankfurt/D)
Success stories in NANORA - Poland
N. McMillan, Drop Technology, Dublin/IRL
17.06.2015
16:00,
Logos/Genius
Hall 9.1 ACHEMA Praxis Forum
Industrial and labour safety (T. Sinner, Merck KGaA, Darmstadt/D)
The safe outsourcing of chemical processes, the big challenge for Multi-product chemistry
A. Schnyder, Schnyder Safety in Chemistry Ltd., Rieden-Nussbaumen/CH
17.06.2015
16:00,
Agenda
Forum, Level 0 Plant control
Process automation and new software tools (M. Wiedau, RWTH Aachen/D)
Issues and considerations in calculating economic and operating benefits from Point-of-Work implementations
S. Ceasar, K. Savage, Apex Supply Chain Technologies GmbH, Rüsselsheim/D
17.06.2015
16:00,
Illusion 1
CMF Reaction engineering
Special reactors (U. Kragl, University of Rostock/D)
Process optimization of a gas-liquid reaction in a rotating packed bed centrifuge
G. Grim, ANDRITZ KMPT GmbH, Vierkirchen/D
17.06.2015
16:00,
Granat
Hall 11.0 ACHEMA Praxis Forum
Innovative process analytical technology (A. Lambrecht, Fraunhofer IPM, Freiburg/D; B. Hitzmann, University of Hohenheim/D)
In-line particle sizing probe as a PAT-tool in high-shear and fluid-bed processes
S. Dietrich, Parsum GmbH, Chemnitz/D
17.06.2015
16:00,
Fantasie 1
CMF Risk Assessment and Sustainability in the Focus of Lab Planning
(H. Philipp, BASF SE, Ludwigshafen/D; P. Dockx, Van Looy Group, Antwerp/B)
Risk assessment with respect of technical gases
W. Bischoff, GC DRUVA GmbH, Fulda/D
17.06.2015
16:00,
Panorama 1
Forum, Level 1 Developments in desalination
(H. Glade, University of Bremen/D)
High performance polymer compounds - a new class of material for heat exchangers in corrosive environments
N. Scherer, T. Orth, P. Mueller, Technoform Kunststoffprofile GmbH, Lohfelden/D
17.06.2015
16:15,
Conclusio 2
CMF Worldwide best practices in eco-efficient construction and management of chemical parks
(H. Nover, European Chemical Regions Network (ECRN), Brussels/B)
Limburg and its open innovation policy on the campuses in the knowledge axis
M. Paul, Maastricht University/NL
17.06.2015
16:20,
Granat
Hall 11.0 ACHEMA Praxis Forum
Innovative process analytical technology (A. Lambrecht, Fraunhofer IPM, Freiburg/D; B. Hitzmann, University of Hohenheim/D)
New innovations in process gas chromatography - standardization and modularity make process analytics more economical
H. Mahler, Siemens AG, Karlsruhe/D
17.06.2015
16:20,
Logos/Genius
Hall 9.1 ACHEMA Praxis Forum
Industrial and labour safety (T. Sinner, Merck KGaA, Darmstadt/D)
A holistic approach of alarm management by data mining
M. Hollender, ABB Automation GmbH, Mannheim/D; V. Bales, D square Deutschland GmbH, Bitburg/D
17.06.2015
16:20,
Brillanz
Hall 4.2 ACHEMA Praxis Forum
Laboratory techniques (M. Maucher, WALDNER Laboreinrichtungen GmbH & Co.KG, Wangen/D)
BMS system - BACnet / IP on field devices for laborcontrol
B. Ruhwinkel, Schneider Elektronik GmbH, Steinbach/D
17.06.2015
16:20,
Facette
Hall 3 VIA West ACHEMA Praxis Forum
Pharmaceutical production (R. Ditz, TU Clausthal/D)
Containment in packaging
M. Preus, IMA S.p.a, Ozzano dell'Emilia (Bo)/I
17.06.2015
16:30,
Panorama 1
Forum, Level 1 Developments in desalination
(H. Glade, University of Bremen/D)
Wetting characteristics of different tube materials and their influence on crystallization fouling in falling film seawater evaporators
A. Stärk, H. Glade, University of Bremen/D; K. Loisel, K. Odiot, A. Feßenbecker, A. Kempter, S. Nied, BASF SE, Ludwigshafen/D
17.06.2015
16:30,
Illusion 3
CMF Process Safety Vision 20/20
(S. Kadri, Center for Chemical Process Safety - CCPS, New York, NY/USA)
Intentional competency development
J. Merrath, Dow Deutschland Anlagengesellschaft mbH, Stade/D
17.06.2015
16:30,
Illusion 2
CMF BiobasedWorld - Bioprocesses
Downstream processing (N. Tippkötter, TU Kaiserslautern/D)
Enabling innovative approaches for simplifying mAb purification via matched component, multi-mechanism clarification
J.F. Hester, 3M Purification Inc., St. Paul, MN/USA; S. Winterfeld, 3M Deutschland GmbH, Neuss/D
17.06.2015
16:30,
Agenda
Forum, Level 0 Plant control
Process automation and new software tools (M. Wiedau, RWTH Aachen/D)
A new dawn in refining - how next generation software tools are adding unparalleled flexibility to refinery operations
R. Calder, Schneider-Electric, Crawley/UK; H. Gulati, Schneider-Electric, Lake Forest, CA/USA
17.06.2015
16:30,
Panorama 3
Forum, Level 1 Materials
Powders, foams, composites (M. Weyd, Fraunhofer IKTS, Hermsdorf/D)
Retrofitting, protection and safety with micro reinforced ultra-high performance concrete
S. Hauser, DUCON Europe GmbH & Co.KG, Mörfelden-Walldorf/D
17.06.2015
16:30,
Analog
Forum, Level 0 Industrial water management
Recovery of valuables from wastewater (P. Moller, Kalundborg Kommune/DK)
Adsorption of phosphates onto Granular Ferric Hydroxide as a robust end-of-pipe purification strategy
N. Lambert, R. Dewil, K.U. Leuven, Sint-Katelijne-Waver/B
17.06.2015
16:30,
Consens
Hall 4.C Nickel alloys, titanium and zirconium in the chemical process industry *
(M. Renner, Asset & Corrosion Management Consultancy, Leverkusen/D and H. Alves, VDM Metals GmbH, Werdohl/D)

* organised by VDM Metals GmbH
Industrial grade zirconium for chemical process industry
C. Palmer, P. Witt, Sandvik Materials Technology, Sandviken/S; H. Alves, VDM Metals GmbH, Werdohl/D
17.06.2015
16:30,
Spektrum
CMF International powder and nanotechnology forum
Pharmaceutical technology (H. Takeuchi, Gifu Pharmaceutical University/J; H. Yamamoto, Aichi Gakuin University, Nagoya/J)
Nanomedicine for non-invasive drug delivery across epithelial barriers - intestines, skin and lung
B. Loretz, Helmholtz-Institute for Pharmaceutical Research Saarland (HIPS), Saarbrücken/D
17.06.2015
16:30,
Panorama 2
Forum, Level 1 Latest insight on lignocellulosic biorefineries
(M. Patel, University of Geneva/I)
Overcoming the challenges to large-scale deployment
M. Rubino, D. Giordano, Beta Renewables S.p.A., Tortona/I
17.06.2015
16:30,
Illusion 1
CMF Reaction engineering
Special reactors (U. Kragl, University of Rostock/D)
Characterization of a Multi-Stage Counter-Current Rotating Packed Bed
K. Neumann, M. Grimm, P. Lutze, TU Dortmund/D
17.06.2015
16:30,
Conclusio 1
CMF Catalysis
(S. Schunk, hte GmbH, Heidelberg/D)
Effect of liquid-phase reduction on catalytic performance of Pd-Ag/Al2O3 in acetylene selective hydrogenation
M. Takht Ravanchi, M. Rahimi Fard, S. Fadaee Rayeni, Petrochemical Research and Technology Co., Tehran/IR
17.06.2015
16:30,
Dimension
Hall 4.2 NANORA
(C. Steinbach, DECHEMA e.V., Frankfurt/D)
Co-pilot: Europe's first pilot network for nanoparticle synthesis upscaling
M. Mourad, TNO, Eindhoven/NL
17.06.2015
16:30,
Fantasie 2
CMF Energy efficient processes
Thermal energy storage and recovery (A. Wörner, Deutsches Zentrum für Luft- und Raumfahrt (DLR), Stuttgart/D)
Chemical transformation and storage of thermal energy for the utilization of industrial waste heat
M. Molenda, M. Linder, German Aerospace Center (DLR), Stuttgart/D
17.06.2015
16:30,
Fantasie 1
CMF Risk Assessment and Sustainability in the Focus of Lab Planning
(H. Philipp, BASF SE, Ludwigshafen/D; P. Dockx, Van Looy Group, Antwerp/B)
Laboratory working areas 4.0
C. Müller, WALDNER Laboreinrichtungen GmbH & Co. KG, Wangen/D
17.06.2015
16:40,
Conclusio 2
CMF Worldwide best practices in eco-efficient construction and management of chemical parks
(H. Nover, European Chemical Regions Network (ECRN), Brussels/B)
The "verbund"- basis for value creation
E. Grigat, CHEMPARK - Currenta, Leverkusen/D Cancelled by the author
17.06.2015
16:40,
Logos/Genius
Hall 9.1 ACHEMA Praxis Forum
Industrial and labour safety (T. Sinner, Merck KGaA, Darmstadt/D)
Safety upgrades for solid/liquid separation systems
U. Hochegger, F. Gosch, E. Harrer, ANDRITZ AG, Graz/A
17.06.2015
16:40,
Brillanz
Hall 4.2 ACHEMA Praxis Forum
Laboratory techniques (M. Maucher, WALDNER Laboreinrichtungen GmbH & Co.KG, Wangen/D)
A modified surface plasmon resonance instrument with improved sensitivity
S. Ananthi, University of Madras, Chennai/IND; K. Padmanabhan, Anna University, Chennai/IND; M. Rajavelan, University of Madras, Chennai/IND; R. Hariprakash, Arulmigu Meenakshi Amman College of Engineering, Tamil Nadu/IND
17.06.2015
16:40,
Granat
Hall 11.0 ACHEMA Praxis Forum
Innovative process analytical technology (A. Lambrecht, Fraunhofer IPM, Freiburg/D; B. Hitzmann, University of Hohenheim/D)
Paying less for a barrel
G. Shahnovsky, T. Cohen, R. McMurray, Modcon-Systems Ltd., Acco/IL
17.06.2015
16:40,
Facette
Hall 3 VIA West ACHEMA Praxis Forum
Pharmaceutical production (R. Ditz, TU Clausthal/D)
Ensuring scalable performance of single-use bioreactors from bench to clinical scale
J. Lloyd Simler, Merck Millipore Corp., Bedford, MA/USA
17.06.2015
17:00,
Spektrum
CMF International powder and nanotechnology forum
Pharmaceutical technology (H. Takeuchi, Gifu Pharmaceutical University/J; H. Yamamoto, Aichi Gakuin University, Nagoya/J)
Development of polymeric nanoparticle carrier for drug delivery system and design as solid dosage forms
H. Yamamoto, C. Takahashi, N. Ogawa, Y. Kawashima, Aichi Gakuin University, Nagoya/J
17.06.2015
17:00,
Illusion 3
CMF Process Safety Vision 20/20
(S. Kadri, Center for Chemical Process Safety - CCPS, New York, NY/USA)
Enhanced application and sharing of lessons learned
J. Costa Sala, Celanese, Frankfurt/D
17.06.2015
17:00,
Granat
Hall 11.0 ACHEMA Praxis Forum
Innovative process analytical technology (A. Lambrecht, Fraunhofer IPM, Freiburg/D; B. Hitzmann, University of Hohenheim/D)
Applications of FTIR spectroscopy for online process analytics and control
A. Boos, D. Sellin, M. Bothe, J. Timmermann, J. Fagaschewski, S. Baum, M.-A. Christlieb, G.M. Shibabaw, S. Bohne, L. Hilterhaus, H.K. Trieu, M. Schlüter, A. Liese, Hamburg University of Technology (TUHH)/D
17.06.2015
17:00,
Illusion 2
CMF BiobasedWorld - Bioprocesses
Downstream processing (N. Tippkötter, TU Kaiserslautern/D)
Affinity platforms for the purification of antibody fragments
J. Royce, G. Jagschies, A. Forss, A. Gronberg, G. Rodrigo, M. Gruvegard, GE Healthcare Life Sciences, Uppsala/S
17.06.2015
17:00,
Illusion 1
CMF Reaction engineering
Special reactors (U. Kragl, University of Rostock/D)
Fast-tracking biodiesel production with microwave irradiated reactor
L. A. Jermolovicius, L. C. M. CantagessoL, R. B. do Nascimento, E. R. de Castro, E. V. S. Pouzada, J. T. Senise, Instituto Mauá de Tecnologia, São Caetano do Sul/BR
17.06.2015
17:00,
Agenda
Forum, Level 0 Plant control
Process automation and new software tools (M. Wiedau, RWTH Aachen/D)
Automatic control chart development to statistical analysis of an aspen plus dynamics model
H. Bispo, N. Silva, Federal University of Campina Grande/BR
17.06.2015
17:00,
Panorama 2
Forum, Level 1 Latest insight on lignocellulosic biorefineries
(M. Patel, University of Geneva/I)
Renewable chemical platforms and biobased materials
C. Sanderson, Renmatix, Inc., King of Prussia, PA/USA
17.06.2015
17:00,
Panorama 1
Forum, Level 1 Developments in desalination
(H. Glade, University of Bremen/D)
Absorption of SO2 in seawater and brine
C. Cox, M. Luckas, C. Pasel, D. Bathen, University Duisburg-Essen/D
17.06.2015
17:00,
Fantasie 1
CMF Risk Assessment and Sustainability in the Focus of Lab Planning
(H. Philipp, BASF SE, Ludwigshafen/D; P. Dockx, Van Looy Group, Antwerp/B)
Auxiliary air supply in fume cupboards – different physical impact principles
J. Liebsch, Juergen Liebsch – Forschung und Entwicklung, Weiler/D
17.06.2015
17:00,
Dimension
Hall 4.2 NANORA
(C. Steinbach, DECHEMA e.V., Frankfurt/D)
NANORA - what's next?
U. Niedner-Kalthoff, Hessisches Ministerium für Wirtschaft, Energie, Verkehr und Landesentwicklung, Wiesbaden/D
17.06.2015
17:00,
Consens
Hall 4.C Nickel alloys, titanium and zirconium in the chemical process industry *
(M. Renner, Asset & Corrosion Management Consultancy, Leverkusen/D and H. Alves, VDM Metals GmbH, Werdohl/D)

* organised by VDM Metals GmbH
New experiences with welding and fabrication of nickel alloys
M. Wolf, VDM Metals GmbH, Altena/D
17.06.2015
17:00,
Logos/Genius
Hall 9.1 ACHEMA Praxis Forum
Industrial and labour safety (T. Sinner, Merck KGaA, Darmstadt/D)
Fire resistant and blast proof GRP shelters
M. Hess, INTERTEC-Hess GmbH, Neustadt/D
17.06.2015
17:00,
Facette
Hall 3 VIA West ACHEMA Praxis Forum
Pharmaceutical production (R. Ditz, TU Clausthal/D)
Object-oriented and knowledge based risk management
B. Gübitz, VTU Engineering GmbH, Grambach/A
17.06.2015
17:00,
Analog
Forum, Level 0 Industrial water management
Recovery of valuables from wastewater (P. Moller, Kalundborg Kommune/DK)
The value of wastewater: examples from industrial and urban wastewater projects
C. Jungfer, K. Wendler, T. Track, DECHEMA e.V., Frankfurt/D
17.06.2015
17:00,
Fantasie 2
CMF Energy efficient processes
Thermal energy storage and recovery (A. Wörner, Deutsches Zentrum für Luft- und Raumfahrt (DLR), Stuttgart/D)
Enhanced heat transfer tubes - compact and efficient
J. Moreno, Wieland Thermal Solutions, Esposende/P; T. Lang, Wieland Thermal Solutions, Ulm/D
17.06.2015
17:00,
Conclusio 1
CMF Catalysis
(S. Schunk, hte GmbH, Heidelberg/D)
MnxCe1-xO2 catalysts for low temperature oxidation of diesel engine exhaust
P. More, M.K. Dongare, S.B. Umbarkar, CSIR-National Chemical Laboratory, Pune/IND
17.06.2015
17:00,
Panorama 3
Forum, Level 1 Materials
Powders, foams, composites (M. Weyd, Fraunhofer IKTS, Hermsdorf/D)
Ceramic composite material with carbon nanotubes fabricated by spark plasma sintering
N. Fedosova, P. Faikov, N. Popova, E. Koltsova, E. Zharikov, D.Mendeleev University of Chemical Technology of Russia, Moscow/RUS
17.06.2015
17:05,
Conclusio 2
CMF Worldwide best practices in eco-efficient construction and management of chemical parks
(H. Nover, European Chemical Regions Network (ECRN), Brussels/B)
East German site cooperation as an example for excellent energy- and eco-efficiency
C. Günther, InfraLeuna GmbH/D
17.06.2015
17:20,
Logos/Genius
Hall 9.1 ACHEMA Praxis Forum
Industrial and labour safety (T. Sinner, Merck KGaA, Darmstadt/D)
Safe handling of hose lines
T. Gottschalk, Alfons Markert + Co. GmbH, Neumünster/D
17.06.2015
17:20,
Facette
Hall 3 VIA West ACHEMA Praxis Forum
Pharmaceutical production (R. Ditz, TU Clausthal/D)
Update on progress towards a global traceability framework
C. Stobie, Domino Printing Sciences, Cambridge/UK
17.06.2015
17:20,
Granat
Hall 11.0 ACHEMA Praxis Forum
Innovative process analytical technology (A. Lambrecht, Fraunhofer IPM, Freiburg/D; B. Hitzmann, University of Hohenheim/D)
Advanced FTIR system to characterize photocatalytic activity and passivity
M. Wanner, Fraunhofer IPA, Stuttgart/D; A. Roos, Gasmet Ansyco GmbH, Karlsruhe/D
17.06.2015
17:30,
Panorama 2
Forum, Level 1 Latest insight on lignocellulosic biorefineries
(M. Patel, University of Geneva/I)
Integrated corn ethanol and corn stover ethanol production: a step towards a biorefinery?
H. Bosch, Royal DSM NV, Heerlen/NL
17.06.2015
17:30,
Conclusio 2
CMF Worldwide best practices in eco-efficient construction and management of chemical parks
()
Discussion:
Beyond site integration advantages - from chemical parks to chemical regions

H. Nover, European Chemical Regions Network (ECRN), Brüssel/B

at a glance:

Programme at a glance (pdf-file)


E-Book:

The ACHEMA programme as an e-book


© DECHEMA e.V. 1995-2024 alle Rechte vorbehalten

[close window]